Home > Products > Product category

NEEDLE THREADER AND CHANGE A NEEDLE

Model No: RJ-ANT1-B

  • Spec1: Design for JANOME sewing machines
  • Spec2: Fits all sewing machines
  • Spec3 : 2 in 1 function
  • Spec4 : Made In Taiwan All includes Internal parts
Features:

Model Number : RJ-ANT1-B

Alt. Part Number : ANT1B / ANT1-B

Fits : all sewing machines

M.O.Q. : 3000 PCS

(you can change any color that u like)

MADE IN TAIWAN (UNIQUE CHOOSEN)

Details : renjyico1965@gmail.com

BACK TO LIST

MORE Information

Needle Threader & Change A needle (Blue color)

In this case, you can choose any color that you inquiry.

How to change sewing needles :

1 - Before change needle, please switch the power of your sewing machines.

2 - Place a piece of cloth undermeath in case of needle dropping.

3 - Don't fix the needle too tightly to avoid deformation or astant.

4 - Mind your fingers during exchange as the needle tip is very sharp.

     (That's why this will make the blue / red / purple tip color for you)

5 - proper use will extend the life time.

This product RJ-ANT1 allows you to change the needle easily and also Needle Threader.

Please check the following description for RJ-ANT1 from RENJYI.com

Use this RJ-ANT1-B to your sewing machines

CHANGE A NEEDLE

Turn off the power switch.

Holding the grip (A),

insert the needle into the needle clamp and push it up as far as it will go.

Then tighten the needle clamp screw firmly while keeping the holder in place.

 

NEEDLE THREADING

 

  1. Turn off the power switch.
  2. Hold the grip (A) of threader with mark (B) up. Guide the thread, inserting it into the Y-groove (C) of the knob from right to left.
  3. Place the V-groove (D) over the needle just above the needle eye.
  4. Slide the threader down the needle while pushing it gently until the threader pin goes into the needle eye.
  5. Push the grip (A).
  6. Remove the threader from the needle slowly. Then pick up the loop with the hook (E) pulling the end of the thread out to the back.

 

We offer sealed card, double folding blister, regular card package.

1. Double Card & Double Blister ;

2. Sealed Card ;

(Please kindly contact us for more package details)

For series 1 package, we can offer 5 size to you. Check the following Size.

Type 1.  8cm X 8cm Double folding

Double folding Blister size : 8X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 2.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 3.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)

Capacity of product : 5X4X2cm (length X width X height)

Type 4.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)

Capacity of product : 7.5X5X3cm (length X width X height)

Type 5.  10.5cm X 18cm Double folding

Double folding Blister size : 18X10.5X4cm (lenght X width X height)

Capacity of product : 8X6.5X4cm (length X width X height

For sealed card package, we offer 1 type to you.

Series  9.5 X 9.5 cm sealed card package (1 sewing foot in)

Card size : 9.5 cm X 9.5 cm (length X width)

Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)

----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.

Contact renjyi1965co@gmail.com for more detail.

Contact RENJYI ENTERPRISE CO., LTD.

MAIL : renjyico1965@gmail.com

CEO : Calvin Lin

SWEWING FEET FACTORY
SINCE 1965& 1995

LOOKING FOR Products

Please kindly contact us by mail at

renjyico1965@gmail.com

Address: No.1-1, Ln. 191, Side Rd., Wufeng Dist., Taichung City 413, Taiwan (R.O.C.) TEL:+886-4-23399706 FAX:+886-4-23323136
Factory & Project Discusscion : renjyico1965@gmail.com Export Department : migolin@naver.com

拆屋工程