• google
• Twitter

MORE Information

2020 Add fitting sewing machines : SINGER IDT sewing machine

Fit SINGER IDT sewing machine model : C240 and future new series. (2020 -

820243096 family sewing machines : TYPE A* C D E F G

A* except hobby™ 301, 303, 307 & 309

Before fitting sewing machines, please check the following classification :

(PFAFF sewing feet belongs to TAIWAN UNIQUE choosen)

By finding the code letter that represents your machine from the list below,

You'll be able to tell which accessories through-out the catalogue are available for your machine.

If you have any questions, Please check the PFAFF offical website : PFAFF SEWING COMPANY

Which presser foot fits your sewing machine? Just check the following.

The Free-motion/Darning Foot is perfect for sewing free-motion
embroidery or darning.
1. Make sure the needle is at its highest position.
2. Attach the Darning Foot: with your thumb and finger, squeezing the front and back of the
foot together. Insert the pin of the Darning Foot as far as it will go into the hole at the back
of the presser foot holder.
3. The “C-shaped” Guide should be positioned around the presser bar. The long arm must be
behind the needle clamp. Tighten the screw.
4. Lower the feed dogs.
5. If you like, you can hoop the project in a round embroidery hoop for more stability.
6. Select a straight stitch and activate the free-motion function, or put the presser foot in the
darning/free-motion position.
7. Pull up the bobbin thread and sew a few stitches to secure. Clip the thread ends close to the
project and continue sewing.
TIP: Remember, when sewing with the feed dogs lowered, the stitch length is determined by
you. An even, medium-to-fast sewing speed will allow you to sew a more consistent length
of straight stitch. Sewing too slowly may cause small knots to appear on the
reverse side of your work.

Machines with 5 mm and 6 mm stitch width, without IDT™ system
varimatic™ 6087, 6086, 6085 (6 mm)
*hobby™ 309, 307, 303, 301 (5,5 mm)
These sewing machines have a presser foot holder of 6 mm. Because newer
presser feet are produced to fit 8 mm holders, there may be a small gap between
the holder and the presser foot attachment. You will need to change the 8 mm
presser foot holder when using the newer presser feet.

Machines with 5,5 mm stitch width, without IDT™ system
hobby™ 1042, 1040, 1032, 1030, 1022, 1020, 1016

Machines with 5,5 mm stitch width, without IDT™ system
expression™ 2014
tiptronic™ 6112, 6110, 2020, 2010
select™ 2.2, 2.0, 1528, 1526, 1520
hobby™ 4260, 4250, 4240

Machines with 5,5 mm and 6 mm stitch width, and IDT™ system
select™ 4.2, 4.0, 3.2, 3.0,
select™ 1548, 1546, 1540, 1538, 1536, 1530 (5,5 mm)
tiptronic™ 6270, 6250, 6232, 6230,
tiptronic™ 6152, 6150, 6122, 6120 (5,5/6 mm)
stretch & jeans™ 6091 (6 mm)
freestyle™ 1527, 1522

Machines with 6 mm stitch width, and IDT™ system
creative™ 2124
quilt expression™ 2046, 2044, 2042
expression™ 2036, 2034, 2028, 2026, 2024
classicstyle™ 2029, 2027, 2025, 2023
tiptronic™ 2040, 2030, 2020, 2010

Machines with 9 mm stitch width, without IDT™ system
creative™ 7560

Machines with 9 mm stitch width, and IDT™ system
creative™ 2170 , 2144, 2140, 2134
creative™ 7570, 7562, 7550, 7530
performance™ 2058, 2056, 2054
quilt expression™ 2048
expression™ 2038

Machines with 5,5 mm stitch width, without IDT™ system
hobby™ 1142, 1132, 1122

Machines with 9 mm stitch width, and IDT™ system
creative sensation™ pro
creative sensation™
creative vision™
creative performance™
creative™ 4.5, 4.0, 3.0, 2.0
performance™ 5.0
quilt expression™ 4.2, 4.0
expression™ 3.5, 3.2, 3.0, 2.0
expression™ 150

Machines with 7 mm stitch width, and IDT™ system
creative™ 1.5
quilt ambition™ 2.0
ambition™ 1.5
ambition™ 1.0
ambition essential™
passport™ 2.0
Machines with 6 mm stitch width
SMARTER BY PFAFF™ 260c,160s,140s

------------- Or, you can contact us for more detail.

We offer sealed card, double folding blister, regular card package.

1. Double Card & Double Blister ;

2. Sealed Card ;

(Please kindly contact us for more package details)

For series 1 package, we can offer 5 size to you. Check the following Size.

Type 1.  8cm X 8cm Double folding

Double folding Blister size : 8X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 2.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 3.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)

Capacity of product : 5X4X2cm (length X width X height)

Type 4.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)

Capacity of product : 7.5X5X3cm (length X width X height)

Type 5.  10.5cm X 18cm Double folding

Double folding Blister size : 18X10.5X4cm (lenght X width X height)

Capacity of product : 8X6.5X4cm (length X width X height

For sealed card package, we offer 1 type to you.

Series  9.5 X 9.5 cm sealed card package (1 sewing foot in)

Card size : 9.5 cm X 9.5 cm (length X width)

Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)

----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.

Contact renjyi1965co@gmail.com for more detail.

This foot can be also used on the ''regular low shank'' sewing machines.

Step 1. Change 9869488600 to replace the original shank adapter.

Step 2. Use the screw from RENJYI - RJ-SC02 to against the bar.

Step 3. try it on and use it.

This set calls : 9869488600 + RJ-SC02

Order PT. number : RJ-SC02-PF

Contact RENJYI ENTERPRISE CO., LTD.

MAIL : renjyico1965@gmail.com

CEO : Calvin Lin