Home > Products > Product category

3 SIZE BALL POINT SEWING NEEDLES PACK

Model No: 990200000A

  • Spec1: Design for JANOME sewing machines
  • Spec2: #9/65 x 1, 11/75 x 1 #14/90 x 3 Needle system: HAx1 SP
  • Spec3 : Fits mostly sewing machines
  • Spec4 : MADE IN VIETNAM
Features:

Model Number : 990200000A

Alt. Part Number : 990200000 / 990200000-A

This pack will includes the following size

9/65 X 1  11/75 X 1  14/90 X 3

Fits : JANOME / REGULAR sewing machines

For : mostly sewing machines

M.O.Q. : 100 CLEAR BOX (500 PCS)

MADE IN VIETNAM (UNIQUE CHOOSEN)

Details : renjyico1965@gmail.com

BACK TO LIST

MORE Information

Taiwan UNIQUE chosen for 3 size sewing needle pack

9/65 X 1 with 11/75 X 1 with 14/90 X 3

How do I know what type of these needles, please check the following photo.
 

For 9/65

 

Tips :

  1. The special design helps to avoid skipped stitches.
  2. The shank is flatter than on other needles with the same diameter.
  3. This means that the needle is closer to the hook, which also helps to avoid skipped stitches.

 

Suitable fabrics : 

  1. For Light fabric
  2. For Thin fabric

Available needle sizes

         9/65 JANOME NEEDLE

Special features

  1. Special transition from the scarf to the eye.
  2. Shorter eye.

Point shape

             ball point

 

For 11/75

Tips :

  1. The special design helps to avoid skipped stitches.
  2. The shank is flatter than on other needles with the same diameter.
  3. This means that the needle is closer to the hook, which also helps to avoid skipped stitches.

 

Suitable fabrics : 

  1. For elastic or highly elastic knitted fabric.
  2. The more elastic the material, the more suited the stretch needle is
  3. (if in doubt, use the stretch needle). Swimwear fabrics.
  4. Fine jersey, silk jersey, single jersey, velour cloth Cotton knitwear

Available needle sizes

          75/11 - Blue Tip 990311000A / 9903110000

Special features

  1. Special transition from the scarf to the eye.
  2. Shorter eye.

Point shape

            Medium ball point

 

For 14/90

Tips :

  1. The needle eye and the long groove do not become clogged with adhesive backing and
    foams during embroidery work.
  2. The needle is particularly suited for sewing on self-adhesive elements.
  3. The wide range of additional characteristics make sewing many – even difficult – materials much easier:
    This is why “super” is included in the name.

 

Suitable fabrics : 

  1. For elastic or highly elastic knitted fabric.
  2. Hook-and-loop tape
  3. Material processing from thin to thick

Available needle sizes

          90/14 - Red Tip 202122001 

Special features

  1. Non-stick surface.
  2. Ball point eye. 
  3. Prevent skipped stitches when sewing 

Point shape

            Large / Long ball point

 

3 size pack for this model number : 990200000A / 990200000

#9 (65/9) : Thinner bur to sew thin fabrics

#11 (75/11) : Sewing thing plain woven cotton.

#14 (90/14) : Sewing general fabrics, such as cotton.

 

How to change sewing needles :

1 - Before change needle, please switch the power of your sewing machines.

2 - Place a piece of cloth undermeath in case of needle dropping.

3 - Don't fix the needle too tightly to avoid deformation or astant.

4 - Mind your fingers during exchange as the needle tip is very sharp.

     (That's why this will make the blue / red / purple tip color for you)

5 - proper use will extend the life time.

 

This product RJ-ANT1 allows you to change the needle easily and also Needle Threader.

Please check the following description for RJ-ANT1 from RENJYI.com


CHANGE A NEEDLE

Turn off the power switch.

Holding the grip (A),

insert the needle into the needle clamp and push it up as far as it will go.

Then tighten the needle clamp screw firmly while keeping the holder in place.

 

NEEDLE THREADING

 

  1. Turn off the power switch.
  2. Hold the grip (A) of threader with mark (B) up. Guide the thread, inserting it into the Y-groove (C) of the knob from right to left.
  3. Place the V-groove (D) over the needle just above the needle eye.
  4. Slide the threader down the needle while pushing it gently until the threader pin goes into the needle eye.
  5. Push the grip (A).
  6. Remove the threader from the needle slowly. Then pick up the loop with the hook (E) pulling the end of the thread out to the back.

We offer sealed card, double folding blister, regular card package.

1. Double Card & Double Blister ;

2. Sealed Card ;

(Please kindly contact us for more package details)

For series 1 package, we can offer 5 size to you. Check the following Size.

Type 1.  8cm X 8cm Double folding

Double folding Blister size : 8X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 2.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 3.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)

Capacity of product : 5X4X2cm (length X width X height)

Type 4.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)

Capacity of product : 7.5X5X3cm (length X width X height)

Type 5.  10.5cm X 18cm Double folding

Double folding Blister size : 18X10.5X4cm (lenght X width X height)

Capacity of product : 8X6.5X4cm (length X width X height

For sealed card package, we offer 1 type to you.

Series  9.5 X 9.5 cm sealed card package (1 sewing foot in)

Card size : 9.5 cm X 9.5 cm (length X width)

Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)

----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.

Contact renjyi1965co@gmail.com for more detail.

Contact RENJYI ENTERPRISE CO., LTD.

MAIL : renjyico1965@gmail.com

CEO : Calvin Lin

SWEWING FEET FACTORY
SINCE 1965& 1995

LOOKING FOR Products

Please kindly contact us by mail at

renjyico1965@gmail.com

Address: No.1-1, Ln. 191, Side Rd., Wufeng Dist., Taichung City 413, Taiwan (R.O.C.) TEL:+886-4-23399706 FAX:+886-4-23323136
Factory & Project Discusscion : renjyico1965@gmail.com Export Department : migolin@naver.com

拆屋工程