• google
• Twitter

MORE Information

920458096 family sewing machines : 1 2 3 4 5 6 7

Before fitting sewing machines, please check the following classification :

(HUSQVARNA VIKING sewing feet belongs to TAIWAN UNIQUE choosen)

By finding the code letter that represents your machine from the list below,

You'll be able to tell which accessories through-out the catalogue are available for your machine.

If you have any questions, Please check the HUSQVARNA VIKING offical website : HUSQVARNA VIKING

Which presser foot fits your sewing machine? Just check the following.

Invisible Zippers (sometimes called concealed zippers) are
most often seen in the center back of a dress, in the side or
back of pants and skirts, and in some home dec projects. As the
name implies, the zipper is hidden in a seam, becoming virtually
invisible. This zipper application is often thought of as very
difficult to do, however it’s really one of the easiest, especially
when sewn with the HUSQVARNA VIKING® Metal Invisible
Zipper Foot.

1. An invisible zipper is always inserted before stitching the garment seam.
2. Mark the length of the zipper opening on the seam allowances and on the zipper.
The excess length should be at the bottom of the zipper.
3. Snap on the Clear Invisible Zipper Foot
4. Select center needle position straight stitch. Length 2.5-3.0.
5. Place the right part of the zipper on the right side of the seam, right sides together. The coil
should be placed on the seam line, starting about ¾” (2cm) below the cut edge of the fabric.
6. Carefully press the zipper teeth slightly to the right and lower the presser foot, so that the
coil lies in the groove to the right of the needle.
7. Starting at the top, sew the zipper in place. Stop at the mark on the zipper and seam
allowance and tie-off.
8. Place the second zipper tape on the left side of the opening, right sides together. Make sure
both coils are level.
9. Pin the zipper in place. Open the zipper.
10. Lower the presser foot with the left groove over the zipper teeth. Sew in the same way as the
first guide.
11. Close the zipper. Place the fabric with the zipper right sides together. Pin the rest of the
fabric below the zipper right sides together.
12. Snap on the regular Zipper Foot E to the left of the needle. Adjust the needle position
as needed.
13. Sew the seam from the lower edge and up to the zipper overlapping the backstitched seam.
14. Press the seam open
Note: Buy an invisible zipper that is at least 1 ¼” (3cm) longer than the zipper opening.

HUSQVARNA VIKING 1

ORCHIDEA™, 1250, #1+, 1200, 1100, 1090, 1070, 1070 S, 1050.

HUSQVARNA VIKING 2.

990 S, 990, 980, 960, 950 S, 950, 945, 940.

HUSQVARNA VIKING 3.

630, 620, 610, 190, 185, 180, 150, 120.

HUSQVARNA VIKING 4.

105, 100, 95, 90.

HUSQVARNA VIKING 5.

PRELUDE™ 360, PRELUDE™ 340,
DAISY™ 335, 330, 325, 320, 315, 310,

HUSQVARNA VIKING® 250, 230, 225/215, 210, 205,
SCANDINAVIA™ 100,
EMERALD™ 122, 118, 116.

HUSQVARNA VIKING 6.

PLATINUM™ 955 E, 950 E,
PLATINUM™ Plus 775, 770, 755

Quilt, 750 Quilt, 735, 730, 715,

ROSE™ 605, 600,

IRIS™, LILY™ 555, 550, 545, 540, 535, 530,

HUSQVARNA VIKING® 500,
INTERLUDE™ 445, 435,

FREESIA™ 425, 415,

HUSQVARNA VIKING® 400, 350,
SCANDINAVIA™ 400, 300, 200,
EMERALD™ 203, 183.

HUSQVARNA VIKING 7.

DESIGNER DIAMOND deLuxe™,
DESIGNER DIAMOND™, DESIGNER
RUBY™ DESIGNER TOPAZ™ 30, 20,
DESIGNER™ SE, DESIGNER™ SE
Limited Edition, DESIGNER™ I, II,
QUILT DESIGNER™,
QUILT DESIGNER™ II, SAPPHIRE™
875Q, 870Q, 855, 850, 835, 830.

------------- Or, you can contact us for more detail.

We offer sealed card, double folding blister, regular card package.

1. Double Card & Double Blister ;

2. Sealed Card ;

(Please kindly contact us for more package details)

For series 1 package, we can offer 5 size to you. Check the following Size.

Type 1.  8cm X 8cm Double folding

Double folding Blister size : 8X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 2.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X2cm (lenght X width X height)

Capacity of product : 5X4X1cm (length X width X height)

Type 3.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3cm (lenght X width X height)

Capacity of product : 5X4X2cm (length X width X height)

Type 4.  7.5cm X 15.5cm Double folding

Double folding Blister size : 15.5X7.5X3.5cm (lenght X width X height)

Capacity of product : 7.5X5X3cm (length X width X height)

Type 5.  10.5cm X 18cm Double folding

Double folding Blister size : 18X10.5X4cm (lenght X width X height)

Capacity of product : 8X6.5X4cm (length X width X height

For sealed card package, we offer 1 type to you.

Series  9.5 X 9.5 cm sealed card package (1 sewing foot in)

Card size : 9.5 cm X 9.5 cm (length X width)

Sealed size : 3 X 3 X 1.5 cm (Length X Width X Height)

----------Others 3in, 5in, 15in, 10in belongs to OEM/ODM.

Contact renjyi1965co@gmail.com for more detail.

This foot can be also used on the ''regular low shank'' sewing machines.

Step 1. Change 4124112-45 or 4126161-45 to replace the original shank adapter.

Step 2. Use the screw from RENJYI - RJ-SC03 R3 to against the bar.

Step 3. try it on and use it.

↑ 4124112 + R3 (RJ-SC03)

↑ 4126161-45 + R3 (RJ-SC03)

Contact RENJYI ENTERPRISE CO., LTD.

MAIL : renjyico1965@gmail.com

CEO : Calvin Lin